Our Lucky Day!

Yesterday we planned a trip to Ikea to pick up our countertops and DOMSJO apron sink. We had made arrangements with Nate’s parents to use their truck in order to haul everything home. (We had already learned our lesson in regards to going to ikea without a truck!)

 

Before leaving I made up a quick shopping list through ikea.com and that’s when I saw this:

IMG_1894[1]

 

It had been in stock the night before so needless to say I was very upset.

We headed out to Ikea anyway since we needed the truck for the countertops and those were definitely in stock.

We ended up going with the Numerar butcher block in oak.

After arriving at Ikea and placing my countertop order, Nate suggested we check out the ‘As Is’ section. It was there that the heavens opened up and the Ikea Gods smiled down upon us. There, on the back wall was my DOMSJO sink in perfect condition and for half off!

IMG_1869[1]

 

Nate stood guard while I ran for a cart. We felt like we had hit the jackpot. Smiling ear to ear, we rolled our baby to the register.

After the Ikea miracle we figured we would test our luck once again at a different Home Depot in hopes that our perfect faucet would be in stock. I called ahead since my app was showing only two available, meaning there was only one plus the floor model. The guy I spoke with said they were out of stock Wah! I thought our luck had run out, and then my phone rang. It was the Home Depot guy I had just spoken with. He said they had one left and pulled it for us to pick up at the desk. Sweet!

We figured we would keep testing our luck and headed to Lowes to look at some dishwashers. (It would be much easier to change out our dishwasher without countertops in place.)

We had our eyes on this dishwasher:

http://www.lowes.com/pd_378126-46-WDF510PAYS_4294857925__?productId=3606462&Ns=p_product_qty_sales_dollar|1&pl=1&currentURL=%3FgoToProdList%3Dtrue%26Ns%3Dp_product_qty_sales_dollar%7C1&facetInfo=

Online it was listed as $399 so when we were at the store and it was priced at $449 we asked for a price check. When the guy put in the model # the price popped up as $349. What the what! We seriously should’ve played the lotto. We placed our order and scheduled delivery.

Thoroughly exhausted, we headed home with our loot.

Nate worked like a mad man to get the sink, faucet, and some countertops installed the same night. We also removed the old dishwasher while we were at it.

Here’s where we’re at today:

IMG_1886[1]

 

I am now thinking that I am going to replace the pendant light over the sink with something less visually “heavy” in order to let the sink/faucet be the focal point. This picture just doesn’t do the new counters justice. They are a beautiful color and they give so much warmth to the room.

Here’s a side by side comparison of our progress:

IMG_1890[1]

 

I am loving this view:

IMG_1892[1]

Advertisements

Kitchen Faucet Hunting

Cabinet Update: First coat of Cabinet Coat paint is on and the doors are currently drying in the sun room!! YAY! FYI the Cabinet Coat paint is amazing and really does dry to an almost factory finish.

Now on to the topic at hand: Kitchen faucet shopping.

Because we are going to attempt to install the IKEA DOMSJO sink we needed to find a faucet that met very specific qualifications:

IMG_1830[1]

Our Faucet Specifications:

1) Needs to be a one hole installation (I am not comfortable drilling additional holes in the sink although I’ve heard it can be done).

2) Since there’s no hole for a side sprayer it needs to be some sort of pull down or pull out spout with spray option.

3) Spout reach needs to be at least 8 inches to reach all corners of the sink.

4) Good customer reviews (at least 4 out of 5 stars).

5) $200ish

My first inclination was to look for a faucet at Ikea, but their only spray faucets were either too expensive or didn’t spray.

faucet post3

Ikea GLITTRAN $149- I absolutely love this style and price, however there is no sprayer and for us it just wouldn’t be practical considering how much we use our current sprayer in the kitchen.

faucet post2

Ikea ELVERDAM $179- I also love this style and the spout does pull down, however there is no spray option and I read some negative reviews in regards to the water pressure.

Overall, I wasn’t impressed with the Ikea options. It was on to Home Depot which is right down the road, making it convenient should we ever have to return or exchange the faucet that we decide to go with.

After sifting through tons of reviews and information I decided (or thought I decided) to go with a simple model from HD:

faucet post 5

American Standard Fairbury $129- This faucet met all of my requirements and the sleek lines really won me over (not to mention the price).

Off to Home Depot we went to check out this beauty in person. It definitely looked great and I gave the spout a good tug and let go. Much to our surprise the spout flew back up snapping off pieces of the plastic grommet at the top of the neck. Needless to say I didn’t feel comfortable spending over $100 on a product that would break that easily.

After that experience, we went through the models, tugging, pulling, and scanning barcodes to read reviews (Love my Home Depot App!). After some time we finally decided on two contenders:

faucet post6

Moen Benton $198- Excellent reviews and met all of our requirements.

faucet post4

Moen Lindley $218- Just over our budget, but we loved the look. This faucet felt like it would fit in better with the country look we are going for, especially with the apron sink. Spending $18 more to get the look I wanted seems completely worth it to me! 🙂

THIS IS THE ONE!!!! 🙂

Ready to pull the trigger on the faucet purchase, we looked for our cargo on the shelves…..only to find an empty spot where our precious faucet was supposed to be 😦 Apparently the one that was listed in stock is the model. Wah! Hopefully we’ll just pick it up at a different store.

Tomorrow we will also be picking up:

1) Our new countertops

2) Our apron sink

3) Beadboard backsplash

Our budget kitchen reno is definitely underway.

Kitchen Update

Part one of our kitchen update: Painting Cabinets

Painting our kitchen cabinets is taking FOREVER. Seriously. FOREVER.

Take my advice. If you work full time and are thinking about painting your kitchen cabinets, do yourself a favor and do one section at a time. This allows you to see your progress and motivate you to keep going. Of course, it will be a much easier job if your cabinets aren’t covered in laminate veneer sheets that need to be removed.

Taking on the entire kitchen at once is extremely overwhelming and even disheartening at times.

Here’s a breakdown of our timeline so far:

Weekend #1- Take down all doors, remove all hardware, remove all dishes from cabinets and move into living room,dining room, and guest rooms (Your house should look like you are having an indoor garage sale).

IMG_1608[1]

Weekend #2- Start sanding, realize that sanding does nothing on the laminate veneer and start peeling the veneer sheet off instead. Realize that using a heat gun will make your life ten times easier and finish removing all veneer sheets.

IMG_1547[1]

Weekend #3- Remove veneer sheets from cabinet boxes, drawers, and sides of doors. Remove backsplash. Clean disgusting wall that was behind the backsplash.

IMG_1561[1]

Weekend #4- Sand all doors using 40 grit in order to remove all the glue from the laminate veneer. Sand inside cabinet boxes as well.

IMG_1678[1]

Weekend #5+#6- Rest and go to couples counseling 🙂

IMG_1602[1]

Weekend #7- Finally finish sanding! Final sanding included 220 grit for a smooth surface. Research primers and paints. See final decision below.

Finally start priming!!! Hallelujah!

IMG_1814[1]

IMG_1812[1]

Our primer of choice:

zinsser-1-2-3-primer1

I had briefly debated using an oil based primer like B-I-N but decided to be more “green” and since we were no longer painting over the laminate veneer I didn’t think we really needed something as strong as B-I-N. Plus it was a lot cheaper: $20 at Home Depot.

As far as paint goes, I am leaning towards using Cabinet Coat or Benjamin Moore. Anyone use either of these?

Hoping to have more progress for you in the next post. (Hopefully it won’t take us another six weeks to finish!)

Thrifting Finds

Today I needed to get away from the disaster zone that is our kitchen and get my thrift store fix. So far there hasn’t been much progress besides removing the backsplash on one side.

IMG_1579[1]

 

We are moving along slowly but surely.

Back to my thrift finds, here’s what I managed to snag today from Goodwill and a vintage shop in the downtown area.

IMG_1593[1]

 

First, I found these cute Churchill blue willow china cups at Goodwill. I don’t think I really got them for a steal ($2.88 a cup) but I love having a matching set of cups for my coffee bar.

Next, I stopped at my favorite vintage shop in my little downtown area. It’s called Ella’s What Not Shop and Ella just happens to be the cutest little puppy that hangs out in the shop.

Their facebook page: https://www.facebook.com/ellaswhatnotshop

IMG_1599[1]

 

I bought the TEA cup ($5) that is now up on my coffee bar, as well as this cool little vintage looking frame ($3). I had been looking for a small oval frame for a while so this fit the bill perfectly. Still need to figure out where it’s new home will be.

IMG_1601[1]

Finally, I snagged a gorgeous vintage looking globe with a wooden base ($20). It now sits on top of the library along with my mini globe from homegoods and my light up globe from Goodwill.

IMG_1598[1]

 

My goal it to fill the top of the library with globes, similar to this picture I found on Pinterest, although it looks like it’s from an IKEA catalog.

globes3

 

Another inspiration pic:

globes1

 

Okay, I need to stop procrastinating and start tackling the monster that is our kitchen renovation. Hopefully we will have more progress to share soon!

 

 

Kitchen Phases

We’ve finally started on the kitchen! This weekend we finished taking the doors and hardware off and began to sand.

Our cabinets look exactly like the cabinets in this blog:

http://cutejunkivemade.blogspot.com/2012/10/how-to-paint-laminate-cabinets-part-two.html

As I was sanding the very first door, we realized that the sanding was not having much effect on the laminate. I changed to a lower grit and kept right on sanding. Then a funny thing happened. I noticed the corner of the laminate starting to peel up, so I gave it a tug and the entire laminate sheet peeled off to reveal actual wood underneath.

IMG_1549[1]

 

Here I am holding up that fateful piece of laminate.

From there we tried to continue removing the laminate from the remaining doors. Of course it was absolutely impossible to do. Then we realized that the solution was heat. Obviously, the continuous sanding on the first door had warmed up the glue enough to release the laminate. From there we used a heat gun and the laminate sheets came off like butter.

IMG_1558[1]

 

Here’s Nate demonstrating our technique for removing the laminate strips.

IMG_1553[1]

 

We have been removing a little each night after work. We are hoping to have all of the laminate removed by this weekend so that we can spend some time patching holes and sanding.

IMG_1554[1]

 

Here’s an up close look at a cabinet that has half of the laminate stripped. (Please ignore the mess inside!)

So that’s the kitchen progress so far.

I am hoping to complete our kitchen face lift in three phases:

Phase #1- Paint cabinets and replace hardware.

Phase #2- Replace counter top and backsplash.

Phase #3- Finishing touches, flooring options to cover hideous tile, replace appliances (dishwasher, stove, and microwave)