Kitchen Progress- Almost Complete!

IMG_1939[1]

 

For the past few days Nate and I have been working like crazy on the kitchen and now we are finally able to see some fruits to our labor.

Things we’ve accomplished since Sunday:

1) Attached new hinges and hardware to cabinet doors.

2) Attached doors back on to cabinet boxes.

3) Installed new dishwasher

4) Finished installing butcher block countertops

5) Installed a new range hood

6) Installed beadboard on sink side as a backsplash.

Things still on the to do list:

1) Install beadboard behind range and ends of cabinets

2) Spackle and paint beadboard

3) Install crown molding and trim pieces

4) Paint ceiling

For now I am just happy to be able to put all of my dishes back in place and bring order back to my house after several months.

It truly is amazing how much paint can transform a room. We love looking at the progress we’ve made so far.

Our kitchen started out like this:

IMG_0661

 

IMG_1530[1]

 

And now looks like this:

IMG_1938[1]

 

IMG_1941[1]

 

So much better already! Once we have completely finished our renovation I will be going through all of my receipts in order to break down all of the costs involved in our makeover. That will be interesting for sure since I have no idea what the total cost will come out to. šŸ™‚

Our Lucky Day!

Yesterday we plannedĀ a trip to Ikea to pick up our countertops and DOMSJO apron sink. We had made arrangements with Nate’s parents to use their truck in order to haul everything home. (We had already learned our lesson in regards to going to ikea without a truck!)

 

Before leaving I made up a quick shopping list through ikea.com and that’s when I saw this:

IMG_1894[1]

 

It had been in stock the night before so needless to say I was very upset.

We headed out to Ikea anyway since we needed the truck for the countertops and those were definitely in stock.

We ended up going with the Numerar butcher block in oak.

After arriving at Ikea and placing my countertop order, Nate suggested we check out the ‘As Is’ section. It was there that the heavens opened up and the Ikea Gods smiled down upon us. There, on the back wall was my DOMSJO sink in perfect condition and for half off!

IMG_1869[1]

 

Nate stood guard while I ran for a cart. We felt like we had hit the jackpot. Smiling ear to ear, we rolled our baby to the register.

After the Ikea miracle we figured we would test our luck once again at a different Home Depot in hopes that our perfect faucet would be in stock. I called ahead since my app was showing only two available, meaning there was only one plus the floor model. The guy I spoke with said they were out of stock Wah! I thought our luck had run out, and then my phone rang. It was the Home Depot guy I had just spoken with. He said they had one left and pulled it for us to pick up at the desk. Sweet!

We figured we would keep testing our luck and headed to Lowes to look at some dishwashers. (It would be much easier to change out our dishwasher without countertops in place.)

We had our eyes on this dishwasher:

http://www.lowes.com/pd_378126-46-WDF510PAYS_4294857925__?productId=3606462&Ns=p_product_qty_sales_dollar|1&pl=1&currentURL=%3FgoToProdList%3Dtrue%26Ns%3Dp_product_qty_sales_dollar%7C1&facetInfo=

Online it was listed as $399 so when we were at the store and it was priced at $449 we asked for a price check. When the guy put in the model # the price popped up as $349. What the what! We seriously should’ve played the lotto. We placed our order and scheduled delivery.

Thoroughly exhausted, we headed home with our loot.

Nate worked like a mad man to get the sink, faucet, and some countertops installed the same night. We also removed the old dishwasher while we were at it.

Here’s where we’re at today:

IMG_1886[1]

 

I am now thinking that I am going to replace the pendant light over the sink with something less visually “heavy” in order to let the sink/faucet be the focal point. This picture just doesn’t do the new counters justice. They are a beautiful color and they give so much warmth to the room.

Here’s a side by side comparison of our progress:

IMG_1890[1]

 

I am loving this view:

IMG_1892[1]

Kitchen Faucet Hunting

Cabinet Update: First coat of Cabinet Coat paint is on and the doors are currently drying in the sun room!! YAY! FYI the Cabinet Coat paint is amazing and really does dry to an almost factory finish.

Now on to the topic at hand: Kitchen faucet shopping.

Because we are going to attempt to install the IKEA DOMSJO sink we needed to find a faucet that met very specific qualifications:

IMG_1830[1]

Our Faucet Specifications:

1) Needs to be a one hole installation (I am not comfortable drilling additional holes in the sink although I’ve heard it can be done).

2) Since there’s no hole for a side sprayer it needs to be some sort of pull down or pull out spout with spray option.

3) Spout reach needs to be at least 8 inches to reach all corners of the sink.

4) Good customer reviews (at least 4 out of 5 stars).

5) $200ish

My first inclination was to look for a faucet at Ikea, but their only spray faucets were either too expensive or didn’t spray.

faucet post3

Ikea GLITTRAN $149- I absolutely love this style and price, however there is no sprayer and for us it just wouldn’t be practical considering how much we use our current sprayer in the kitchen.

faucet post2

Ikea ELVERDAM $179- I also love this style and the spout does pull down, however there is no spray option and I read some negative reviews in regards to the water pressure.

Overall, I wasn’t impressed with the Ikea options. It was on to Home Depot which is right down the road, making it convenient should we ever have to return or exchange the faucet that we decide to go with.

After sifting through tons of reviews and information I decided (or thought I decided) to go with a simple model from HD:

faucet post 5

American Standard FairburyĀ $129- This faucet met all of my requirements and the sleek lines really won me over (not to mention the price).

Off to Home Depot we went to check out this beauty in person. It definitely looked great and I gave the spout a good tug and let go. Much to our surprise the spout flew back up snapping off pieces of the plastic grommet at the top of the neck. Needless to say I didn’t feel comfortable spending over $100 on a product that would break that easily.

After that experience, we went through the models, tugging, pulling, and scanning barcodes to read reviews (Love my Home Depot App!). After some time we finally decided on two contenders:

faucet post6

Moen Benton $198- Excellent reviews and met all of our requirements.

faucet post4

Moen Lindley $218- Just over our budget, but we loved the look. This faucet felt like it would fit in better with the country look we are going for, especially with the apron sink. Spending $18 more to get the look I wanted seems completely worth it to me! šŸ™‚

THIS IS THE ONE!!!! šŸ™‚

Ready to pull the trigger on the faucet purchase, we looked for our cargo on the shelves…..only to find an empty spot where our precious faucet was supposed to be šŸ˜¦ Apparently the one that was listed in stock is the model. Wah! Hopefully we’ll just pick it up at a different store.

Tomorrow we will also be picking up:

1) Our new countertops

2) Our apron sink

3) Beadboard backsplash

Our budget kitchen reno is definitely underway.

Kitchen Update

Part one of our kitchen update: Painting Cabinets

Painting our kitchen cabinets is taking FOREVER. Seriously. FOREVER.

Take my advice. If you work full time and are thinking about painting your kitchen cabinets, do yourself a favor and do one section at a time. This allows you to see your progress and motivate you to keep going. Of course, it will be a much easier job if your cabinets aren’t covered in laminate veneer sheets that need to be removed.

Taking on the entire kitchen at once is extremely overwhelming and even disheartening at times.

Here’s a breakdown of our timeline so far:

Weekend #1- Take down all doors, remove all hardware, remove all dishes from cabinets and move into living room,dining room, and guest rooms (Your house should look like you are having an indoor garage sale).

IMG_1608[1]

Weekend #2- Start sanding, realize that sanding does nothing on the laminate veneer and start peeling the veneer sheet off instead. Realize that using a heat gun will make your life ten times easier and finish removing all veneer sheets.

IMG_1547[1]

Weekend #3- Remove veneer sheets from cabinet boxes, drawers, and sides of doors. Remove backsplash. Clean disgusting wall that was behind theĀ backsplash.

IMG_1561[1]

Weekend #4- Sand all doors using 40 grit in order to remove all the glue from the laminate veneer. Sand inside cabinet boxes as well.

IMG_1678[1]

Weekend #5+#6- Rest and go to couples counseling šŸ™‚

IMG_1602[1]

Weekend #7- Finally finish sanding! Final sanding included 220 grit for a smooth surface. Research primers and paints. See final decision below.

Finally start priming!!! Hallelujah!

IMG_1814[1]

IMG_1812[1]

Our primer of choice:

zinsser-1-2-3-primer1

I had briefly debated using an oil based primer like B-I-N but decided to be more “green” and since we were no longer painting over the laminate veneer I didn’t think we really needed something as strong as B-I-N. Plus it was a lot cheaper: $20 at Home Depot.

As far as paint goes, I am leaning towards using Cabinet Coat or Benjamin Moore. Anyone use either of these?

Hoping to have more progress for you in the next post. (Hopefully it won’t take us another six weeks to finish!)

Thrifting Finds

Today I needed to get away from the disaster zone that is our kitchen and get my thrift store fix. So far there hasn’t been much progress besides removing the backsplash on one side.

IMG_1579[1]

 

We are moving along slowly but surely.

Back to my thrift finds, here’s what I managed to snag today from Goodwill and a vintage shop in the downtown area.

IMG_1593[1]

 

First, I found these cute Churchill blue willow china cups at Goodwill. I don’t think I really got them for a steal ($2.88 a cup) but I love having a matching set of cups for my coffee bar.

Next, I stopped at my favorite vintage shop in my little downtown area. It’s called Ella’s What Not Shop and Ella just happens to be the cutest little puppy that hangs out in the shop.

Their facebook page:Ā https://www.facebook.com/ellaswhatnotshop

IMG_1599[1]

 

I bought the TEA cup ($5) that is now up on my coffee bar, as well as this cool little vintage looking frame ($3). I had been looking for a small oval frame for a while so this fit the bill perfectly. Still need to figure out where it’s new home will be.

IMG_1601[1]

Finally, I snagged a gorgeous vintage looking globe with a wooden base ($20).Ā It now sits on top of the library along with my mini globe from homegoods and my light up globe from Goodwill.

IMG_1598[1]

 

My goal it to fill the top of the library with globes, similar to this picture I found on Pinterest, although it looks like it’s from an IKEA catalog.

globes3

 

Another inspiration pic:

globes1

 

Okay, I need to stop procrastinating and start tackling the monster that is our kitchen renovation. Hopefully we will have more progress to share soon!

 

 

Kitchen Phases

We’ve finally started on the kitchen! This weekend we finished taking the doors and hardware off and began to sand.

Our cabinets look exactly like the cabinets in this blog:

http://cutejunkivemade.blogspot.com/2012/10/how-to-paint-laminate-cabinets-part-two.html

As I was sanding the very first door, we realized that the sanding was not having much effect on the laminate. I changed to a lower grit and kept right on sanding. Then a funny thing happened. I noticed the corner of the laminate starting to peel up, so I gave it a tug and the entire laminate sheet peeled off to reveal actual wood underneath.

IMG_1549[1]

 

Here I am holding up that fateful piece of laminate.

From there we tried to continue removing the laminate from the remaining doors. Of course it wasĀ absolutelyĀ impossible to do. Then we realized that the solution was heat. Obviously, the continuous sanding on the first door had warmed up the glue enough to release the laminate. From there we used a heat gun and the laminate sheets came off like butter.

IMG_1558[1]

 

Here’s Nate demonstrating our technique for removing the laminate strips.

IMG_1553[1]

 

We have been removing a little each night after work. We are hoping to have all of the laminate removed by this weekend so that we can spend some time patching holes and sanding.

IMG_1554[1]

 

Here’s an up close look at a cabinet that has half of the laminate stripped. (Please ignore the mess inside!)

So that’s the kitchen progress so far.

I am hoping to complete our kitchen face lift in three phases:

Phase #1- Paint cabinets and replace hardware.

Phase #2- ReplaceĀ counter topĀ and backsplash.

Phase #3- Finishing touches, flooring options to cover hideous tile, replace appliances (dishwasher, stove, and microwave)

What’s in my water?

A few weeks ago Nate and I used his TDS meter to test our tap water and a couple of bottled waters. From there, my curiosity grew and I decided to test several other types of bottled water.

IMG_1487[1]

If you are unfamiliar with TDS (total disolved solids) testing, the following article would be a good place to start before looking at my results:Ā http://www.wqpmag.com/water-testing-101-tds.

Some highlights of the article:

  • “TDS is anythingā€”other than the pure H2Oā€”in water that you cannot see. This could include any salt, metal or mineral, and the lower the TDS level is, the purer the water.”
  • “In reality, a TDS meter measures the electrical conductivity of water or, in other words, the total amount of mobile charged ions found in water. If an element is dissolved in water and can conduct electricity, it is called an electrolyte. Salt, for example, is an electrolyte. Sugar, however, is not and will therefore not register on a conductivity or TDS meter. This is one reason why a TDS meter is only an estimate of the true TDS.”
  • TDS is measured on a quantity scale, either in mg/L or, more commonly, in parts per million (ppm). Simply put, if the TDS level is 335 ppm, this means that out of one-million parts of H2O, 335 of those parts are something else.

Some other good resources include:

http://www.who.int/water_sanitation_health/dwq/chemicals/tds.pdf

http://www.safewater.org/PDFS/resourcesknowthefacts/TDS_AND%20_pH.pdf

Some things to keep in mind:

1) Not all total dissolved solids are bad.

2) All of the water I tested was in the “excellent” range for TDS

3) My results areĀ estimatesĀ and results will definitely vary depending on your location and TDS meter.

4) There are many other tests for water quality (such as pH) that should be used in addition to a TDS test.

My Results-

1) Our Tap Water

IMG_1495

TDS=219 ppm (parts per million)

 

2) Brita Filtered Water (Filter replaced one week ago)

IMG_1496

 

TDS= 134 ppm

 

3) Pur Aqua Spring (ALDI Brand)-

 

 

IMG_1509

TDS= 191 ppm

 

4) Nice! Spring Water (Walgreens)

IMG_1510

TDS= 191 ppm

*I am pretty sure that the Aldi and Walgreens brand are the same exact water as they are both bottled at the same facility.*

 

5) Publix Spring

IMG_1508

 

TDS= 164 ppm

Label Claim: “Processed by advanced filtration and ozone technologies”

 

6) Nestle Pure Life

IMG_1507

 

TDS= 50 ppm

Label Claim: “Enhanced with minerals for taste.”

 

7) Aquafina (Pepsi Brand)

IMG_1504

 

TDS= 4 ppm

Label: “…purified through a rigorous seven-step process called Hydro-7”

 

8) Dasani (Coca-Cola Brand)

IMG_1505

 

TDS= 30 ppm

Label: “Enhanced with minerals for a pure, fresh taste.”

 

9) Iceland pure

IMG_1500

 

TDS= 44 ppm

“Filtered through the lava mountains of Iceland, it has one of the naturally lowest mineral contents of any water and a high pH of 8.88.”

*I tested Ā the pH level and it was significantly lower than 8.88 that the label claims.*

 

10) Zephyrhills

IMG_1503

 

TDS= 190

 

11) Evian

IMG_1502

 

TDS= 293

Label: “Dissolved solids at 180C: 309 ppm”

 

12) Penta

IMG_1511

 

TDS= 0 ppm

Label: “Trace Pharmaceuticals Free, Bisphenol A Free, Chlorine Free, Arsenic Free, MTBE Free, Chromium 6 Free, Fluoride Free.”

“Penta Water is Over 100X More Pure than Leading National Brands.”

I’ve been told that water with 0 ppm would taste flat, but this water didn’t Ā taste bad in any way.

 

13) Icelandic

IMG_1499

 

TDS= 52 ppm

Label: “Total Dissolved Solids 62 ppm”

 

14) VOSS

IMG_1506

 

TDS= 35 ppm

Label: “Total Dissolved Solids 44”

 

15) FIJI

IMG_1498

 

TDS= 138 ppm

Label: “Total Dissolved Solids 224”

 

If you’re interested in testing your own water I wouldĀ recommend the TDS meter.

IMG_1512

I’m not sure what brand this meter is but a similar one can easily be found on amazon:

http://www.amazon.com/HM-Digital-TDS-EZ-Measurement-Resolution/dp/B002C0A7ZY/ref=sr_1_1?ie=UTF8&qid=1365900362&sr=8-1&keywords=TDS+meter

Happy Water Testing!

I haven’t posted in quite a while, mostly because not much has changed around the house. We had family visiting during Spring Break, so there was a mad dash to clean the house and get the two back rooms and bathroom suitable for guests. My parents could not believe the transformation of the house so far. It was very encouraging to hear the positive feedback on our hard work.

IMG_1169

 

The fam enjoying a pancake breakfast.

IMG_1346

 

My brother and I in Mexico @ Epcot.

Our homemade chalkboard is finally up in the sitting room!

IMG_1130

 

Check out some of my first chalkboard messages!

IMG_1128

IMG_1254

 

After a day of antiquing there were some additions to the plate wall:

IMG_1199

 

Another look at the sitting room through my Goodwill mirror.

IMG_1129

 

Another beautiful Florida sunset!

 

IMG_1161

 

Next up: our kitchen renovation!

Can’t wait to transform this room:

IMG_0661

 

 

 

Chalkboard Challenge

After my gallery wall fail, I decided to make Nate photoshop some ideas for this particular wall in the sitting room (the one behind the chair on the left):

IMG_0948[1]

At first I thought that two simple prints might be nice, but then I started to look at the colors in this room and thought that a large map might be nice. I asked Nate to photo shop a map on the wall and even threw in a chalkboard for good measure.

Here’s what he came up with:

IMG_0953[1]

 

We both liked the map, but I couldn’t get over the idea of having a chalkboard in this room. Picture a welcome message for guests, holiday or birthday messages, love notes, even a chalk fire for Christmas time.

I started to search for some viable options online and I started out looking at maps. In short, I couldn’t find the right size/color/price that I was looking for. Maps were out and the chalkboard idea was in!

While enjoying a traditional Irish meal of corned beef and cabbage (Happy St. Patrick’s Day!) I mentioned to Nate the chalkboard that YHL had created a few months ago. I wanted something similar, except ours would hang horizontally instead of leaning vertically like theirs.

IMG_0981[1]

 

We headed off to Home Depot for supplies (see budget breakdown below), and within a few hours Nate had put the main components together!

IMG_0983[1]

 

I just love having a handy boyfriend! In the above picture the wood had already been sanded and stained (Minwax Jacobean).

Later, I painted the middle with Chalkboard paint.

Here she is in the process of drying:

IMG_0992[1]

 

Can says I have to wait three days before we can write on it. Boo. Nonetheless, I am super excited to have a Welcome message up for my family visit this weekend!

Here’s a quick budget breakdown of this project:

1.) Two 1X3-8FT boards $2.90

2.) One MDF panel for the back $5.97

3.) Wood screws $3.88

4.) Minwax finish in Jacobean $4.78

5.) Chalkboard paint $9.67

Tax 1.91

Total= $29.11 <—Not bad for a 2X4 feet chalkboard with a nice wood stained frame!

Overall, I am extremely satisfied with this project. It was quick and easy and will be something that we can use for years to come!

Happy St. Patty’s Day!

IMG_0927[1]

 

Gallery Wall Fail

IMG_0829[1]

I had such high hopes for my gallery wall in the sitting room. Sometimes things just don’t feel right when they are done and my gallery wall was one of those things. I don’t know if it was the mix of frames that I used, but no matter what I did my gallery of pictures just looked clunky, cluttered, and out of place. Not too mention, when I took a step back it felt like the frames were competing with my plate wall. There was just too much going on!

IMG_0885[1]

 

My first attempt: Not bad but felt like it needed more.

IMG_0831[1]

IMG_0838[1]

 

After hours of arranging and straightening they still didn’t feel right.

This is when I decided that this just wasn’t going to work, at least not in this room.

My poor wall after myĀ indecisiveness:

IMG_0909[1]

While the spackle dries and I get ready to paint over the spackle spots, I am currently browsing some prints that I think would look nice in here. While the nails were still up I experimented with two different sized ikea frames and the larger one was perfect. Two 11X14 prints fit perfectly and don’t complete with the shelves or plate wall. It also looks much cleaner and more streamlined.

Some prints that I am considering:

IMG_0920[1] IMG_0922[1] IMG_0921[1]

http://www.etsy.com/shop/thewheatfield?ref=top_trail

Also loving some of the posters over at urban outfitters:

http://www.urbanoutfitters.com/urban/catalog/category.jsp?id=A_FURN_WALL

Overall, I am glad that the crazy gallery wall is down. I would never want something up in my house that I don’t absolutely love. If it doesn’t make me smile then I don’t want to see it everyday. My gallery wall experience made me realize that not everything in a design book or blog is going to “fit” my house or my style. I am thankful for the learning experience and am realizing that I actually enjoy this whole trial and error thing when it comes to decorating. Sometimes you get this burst of inspiration and realize that something you had sitting around would be perfect in another space or use. I am in love with this whole process and it makes me excited to think about all the possibilities that my house holds!